Dual plug heads

Discussion in 'PSI Superchargers Tech Questions' started by jonimus333, Jan 22, 2009.

  1. jonimus333

    jonimus333 New Member

    Joined:
    Nov 7, 2007
    Messages:
    504
    Likes Received:
    0
    Don,t have a set of single plug valve covers to check with, but need to know witch hole do I install the plug ? should I still use a touch of anti seaze on it, also should I use pre crushed washers. What thickness? It may be stupid, but I want to get it right the first time. Thanks as always Don.
     
    #1
    jonimus333, Jan 22, 2009
  2. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    I don't think it matters which one but I would plug the 2nd hole also a little anti size... for now if you dont have a set of single plug covers use the 2 hole and a spark plug///Dave
    www.myspace.com/daveloweswr
     
    #2
    secondwindracing, Jan 22, 2009
  3. hemi altered 378

    hemi altered 378 Blown Altered

    Joined:
    Jul 3, 2004
    Messages:
    864
    Likes Received:
    0
    plug the one on the right. bought my plugs from Wizard, no washers just a little anti-seize.
     
    #3
    hemi altered 378, Jan 22, 2009
  4. jonimus333

    jonimus333 New Member

    Joined:
    Nov 7, 2007
    Messages:
    504
    Likes Received:
    0
    Plugs

    Thanks Dave It is Friday morning. Judy and I are getting ready to go pick the supercharger up. It about 3 hours away. so should be back around 4:00 or 5:00 Pm today. Will give you a shout. Maybe there are things I need to look at. to make sure it is good to start the season with, Was told it only had 12/13 runs since it came back from DMPE. Again Thanks.
     
    #4
    jonimus333, Jan 23, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM