Data Logger Inputs

I Just Bought Data Logger And Before I Install This I Want To Know What I Need To Monitor What I Have Is Egt's Boost ,oil Pressure, Fuel Pressure, Inputspeed, Driveshaft Speed, Acceleration, Engine Rpm Thinking About Throttle Postion What Else Should I Think About So I Can Wire This 1 Time Thanks Jamie

 

Anybody?????

 

blower psi and fuel flow (gpms)

 

Intake Temp ?
Cyl Head Temp ?

 

I Have A Autometer Cylinder Head Temp Gauge In The Car And Check Head Temp Before Staging To Make Sure The Engine Is Hot Enough To Be Sealed Up Tight aluminum block and heads (learned this from Bruce Mullins)There Is A Post On Here Now About Intake Temp I Wouldnt Even Know What The Intake Temp Should Be Should I Have The Data Logger Hooked Up To Cylinder Head Temp If I Have The Egts On All 8 The Exhaust Temp Would Tell Me Quicker If I Was Lean On A Cylinder Before Head Temp got Hot Wouldnt It? And Like I Said I Dont Know About Intake Temp thanks Jamie ------------I forgot to add I do have blower pressure but not a flowmeter

 

More important than throttle position would be a flow meter. It's worth it's weight in gold. A flow meter will also double as a throttle position sensor as it's throttle sensitive.