Chevrolet intake gaskets

I am running a conventional aluminum bowtie head. What are you guys using for intake gaskets. This is a blown alky motor.

Thanks
Steve

 

Mr. Gasket p/n 121 is 1/16th thick and 122 is 1/8th inch thick.
There are cheaper knockoff ones from Competition Products, seem to work fine just can't remember the brand names right off.


If your intake manifold has the bolt hole that's inbetween/towards top of the runners, you can get away with it but I recommend welding it shut.

 

intake gaskets

Have had good luck with fel-pro also
Rick

 

i've always had good luck with fel-pro #1275

 

Thanks for the input. I am running the Felpro 1275, just wanted to make sure they were ok with the alcohol.

Steve