blower base gasket

Discussion in 'PSI Superchargers Tech Questions' started by MEANSTREK, Apr 9, 2012.

  1. MEANSTREK

    MEANSTREK New Member

    Joined:
    Nov 7, 2008
    Messages:
    3
    Likes Received:
    0
    Does anyone know where I can get bulk Interface Solutions CMP-4000 gasket material to make my own blower base gaskets. Thank you
     
    #1
    MEANSTREK, Apr 9, 2012
  2. andy wilfong

    andy wilfong Active Member

    Joined:
    May 13, 2003
    Messages:
    190
    Likes Received:
    28
    We have sheets of it that are 22x13, how many do you need?
    Lttlefield Blowers
    714-991-9292
     
    #2
    andy wilfong, Apr 10, 2012
  3. andy wilfong

    andy wilfong Active Member

    Joined:
    May 13, 2003
    Messages:
    190
    Likes Received:
    28
    Oops, typed in wrong number
    714-992-9292
     
    #3
    andy wilfong, Apr 10, 2012
  4. SoDak

    SoDak Active Member

    Joined:
    Dec 29, 2006
    Messages:
    1,524
    Likes Received:
    4
    We have always o-ringed our intake manifolds. How are these 2 different, such as, does a gasket get destroyed everytime the blower comes off?
     
    #4
    SoDak, Apr 11, 2012
  5. andy wilfong

    andy wilfong Active Member

    Joined:
    May 13, 2003
    Messages:
    190
    Likes Received:
    28
    They both work fine, in a case where the blower comes off and on a lot I would suggest an o- ring, because the gasket can stick and tear, there are ways to prevent this, but an o-ring is easier, but both work just fine
     
    #5
    andy wilfong, Apr 11, 2012
  6. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    with o-ring or gasket I always use a small amount of white grease...Dave
     
    #6
    secondwindracing, Apr 11, 2012

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM