Separate names with a comma.
David, sent you an email. Thanks, Shannon
We run the Drazy mod on the intake rockers and we also opened up the oiling groove on our camshaft. We haven't needed the external oiling lines....
I didn't do the alcohol deal, I decided to do the super comp class and then just do the 3 upgrade passes in my own car. Beckman did our class and...
Kuhl or Littlefield make nice manifolds. Probably off the shelf (no lead time).
I agree nitro, Our Int'l toterhome had 650k on the chassis. Unfortunately the DT466 is more like 200 hp but buying it was the best move we've...
Thanks.... I believe I have found a couple guys that are willing. Shannon
In the need of signatures for a TAD license. I am talking to the Div. 5 director as well. I would need them to come out to KCIR or HP and watch my...
The holes in the valve cover are closer together than the spark plug holes in the head. This makes one tube straight and one at an angle. Use the...
Call Norm Drazy, PSI shop number is 480-820-6511 Shannon
I am curious about overdrive vs cubic inch restrictions and the reason for this? Below 450 is only 2.04% overdrive while above 450ci is 2.15%. Is...
Our 15.1 Wheels have 24 bolts in the bead. Shannon
Not sure on the Brad 5 stuff as we are running WAR parts for now. Our 4.310 piston is 740g with the rings. I'm also curious how the total flow...
Got'er done. Thanks..........
There has got to be something out there since Veney's and Brad's (5/6) are at opposite ends of the scale (valve and pocket size wise), but both...
This is a PSI-D, Fat head AJ (WAR) engine. We are switching from a roots to a screw and need a safe baseline tune for some testing and licensing...
I have been trying to get a hold of Conway but no answer. Anyone recommend someone else to size a PSI D - AJ motor fuel system for Top Alcohol? I...
How is MSD's limiter compared to PSI's? Just curious, we have have the MSD points box with the limiter and havn't heard much about PSI's.
I am curious as to how some will be fastening the pan in?
So who makes a large factory crimped oil line from the pan to the pump on a wet sump system? I am currently running a Braided steel hose with...
I was reading NHRA's web site and read about the new oil retention pan. Does a company make one of these? Or is it something we should make...
