Separate names with a comma.
I had to run a tap in the 1/8th NPT threads on the under side of my blower case rear and removed the hard anodizing . Alcohol will puddle in the...
Right click on the white boost press box , go to the right of the page you opened and look at the smooth depth (points) and slide the scale up to...
^^^^^ As Will stated Ken has all you are looking for and ships worldwide .
Send your fuel system to Salemi at Resolution Racing Services to be set up and flowed , you cannot afford not to . He knows what to do with BBC's...
New Century if you can swing it , get the 1/2" head studs and .904 lifters . Very nice piece ! .
Call Ken at Motorsports Unlimited , he can give you the scoop on what is available and what can be rebuilt .
Rimac will repair/calibrate or rebuild their products .
You must be in Bradenton .
You will more than likely get a better chance of a response in the classifieds section .
Call AJPE with that info .
The first time I used a timing light to check the timing using a trigger I could not believe how stable the timing was . Never looking back .
Spend the money on your supercharger .
14.65 gpm at 9k is way rich on that combo and boost level .
It does help a little with the distribution , we use blower gel on a roots and it still blows a good majority of it into the front 4 cly's judging...
Always a good idea to start a little conservative with timing and work your way up with a new combo . To many variables as mentioned above with...
The Mezeires are good but expensive , the MSD and the better grade Powermaster are both good and can survive the 24 Volts .
Ran many sets of them with no probs until 1 set had the retaining pins in the caps walk out and mark up the crank . Now it's BME .
Does the last sentence in red also pertain to the Fuel funnies ? .
What Mike said above .
Congrats on your retirement Chase , care to leave a name the racers can now deal with at Crane that you would recommend for blown alky dealings ? .