Separate names with a comma.
I have about 5 sets of Howards fuel rods 7.078" standard main 1.156" pin with 3-7 runs. nitromas-aafa@att.net James
Clayton if they are in your way you could just send them over to me. Anything to help
Found a set. Thanks!
We need a set of lifters. 2 pair will do fine as well. 1" standard height hemi Mesage me here or email val1717@hotmail.com
Will do. Thanks
We switched from keyed cranks to RCD spline. The bolts are about $130. Are the RCD bolts necessary or will a grade 8 bolt be sufficient
Thanks Butch. I had the smaller shaft but changed to the 1 3/4" hence why I am looking for some more disks. I know someone who may be interested...
Looking for some good used disks. 10.5" disks with 1 3/4" shaft diameter James 661-972-6288 Call or text
I'm looking for an input shaft for a Rob Moore reverser. 8 1/8 can. 1 3/8 10 spline Also need a driveline that is close to 34" along with...
I am looking ing for a direct drive reverser. Please let me know if you have one available. James 661-972-6288
I put the diaper over the starter and just bag the whole thing
Mark, Tommy recertified mine before the March Meet. I drove it down there on a Saturday and he did everything while I was off running other...
John Hale has 2 for sale http://classicfunnycarboard.com/CFB/index.php/topic,26847.0.html
I have the same issue. I cant even get a tach signal. I have routed my wires several different ways, made sure everything was grounded, tried...
I have seen the threads on here several times but can't seem to find them now that I need the info. I need some reccomendations to prtect my...
Drill and tap the pan for push bolts
Thanks for the input. I spoke to Jeff yesterday and he said not too many people are using the gaskets anymore so the tolerances on the pan are...
I just got a Jeff Johnston billet pan for a Big M BBC. Seems there isn't enough clearance at the timing cover and rear seal for a 1 piece pan...
So what are the thoughts of using the powerglide even if I go up to 50% nitro?
I really thought this would start another Chevy vs hemi debate I know the late model hemi is a lot stronger and easier to work on so I believe...