Separate names with a comma.
go to goodvibrationsracing.com they have a video on seting the barrel valve makes it simple
there fine on smaller blower the bigger ones run risk of sucking screen in to the rotors
yes already have both boxes here just going on small combo
has any one piggybacked 8973 with 7al if so did it work well
R&r rods have had very good luck with them
grid all the way
i run bbc with dyke top ring gapless 2nd ring had good luck with it
i have a newer msd 10 with single coil i would sell for 650 plus the ride i had it in the trailer as spare fixing to sell out just let me no if...
we run total seal with dyke top ring gapless second ring in bbc 2000 + hp with very good luck oil stays way cleaner and as much as the bottom end...
the gasket is called ics copper head gasket you can purchase them from many places good vibrations motorsports have them jegs summit ect some also...
orings r not no problem in our block at 4.600 big chief heads i also run 540 bbc 2000 hp range 1471 hh 33 over with the new copper gasket with...
we run a dart iron block it is 4.600 and we are starting to get cracks right where the studs go in the block but we are making over 2200 hp my...
mine done the same thing they sent me a loop line for the pump and it had a return line run back to the tank and was sucking air
car is driving to the left when leaving where should i start
4 link sorry i put the post in wrong spot
4 link help have a all tube chassis car with bbc blown alky when i let go off the trans brake the car is driving to the left where should i start...
we use purple power and pressure washers then let the sun dry it
have bbc 4" stroke callies crank thinking of turning the crank 10/10 is this safe or need to buy new crank running 1471 superman making 2000 ish...
agree with dave i run mine without till we got a hold on it then came off the bv back to the tank
if its a pro tree brake you have to to push the button to to get in reverse