Separate names with a comma.
Check your studs for stretch. I had one to do this, reused the studs in that corner, and it happened again. You could see marks on the heat gasket...
no I never have put any oil in the pan., I would top off the dry sump tank with about 16 quarts, etc.... With the thinner oil I could physically...
Found the problem! Evidently the oil was just to thick to be pulled thru the pump. Temp of the oil and engine when cranked were about 68 degrees....
I haven't had the oil galley plugs out sine late 2013. I guess an Oring maybe could have went bad, ? Do you all think the oil is just to thick...
thanks everyone for the suggestions. I have since changed the oil hose from dry sump to pump and tried different hoses from the suction side of...
Yes, has had good oil pressure, pump is used, but has never gave any issues until now. What is priority oiling? ( I am reading pressure off of...
Not sure of the screen density, but I did do a test fire with out the element in the filter, but nothing changed.
I am running a 500ci Brad block ,with an RCD dry sump pump with a BDS 8-71, in a older nostalgia funny car. My problem is that when I rev the...
