Separate names with a comma.
105lbs I found the spec sheet.
tfx 92 block with austin bilitte hemi heads, solid, head torque specs,with 1/2 inch studs, thanks.
go to good vibration parts and in there tech section there is a video on setting up your b.v leak down.
you need to have the hat hooked up to and then get percentage.
Bruno's number (630) 458-0043
I have used my bruno for 4 years and have not had that problem yet. I know holding power of the air brake on the band is strong.
Thanks mike, out to the shop I go.
Lee did a good job, what I mean is , it rolls over till I try to bolt it down. Be fore I get to 15 inch pounds it locks up. I think once the...
Can I re use my copper head gaskets. If so, what is the procedure, thx
thanks alot Mike!
I was told to run straight 50 wt oil in the motor. I spoke with another racer and he runs 70 wt.. For drag racing what are most using and any...
thanks for the great advice
I got my blower back from littlefield for restripping ect... I have a sheet metal intake. The opening on the manifold has a o-ring and groove. The...
4.5 and 4.5 =572 you are already half way there.
How do you know how hot your engine (dry block-billet heads) is getting in the warm-up. Do you run it for a certain time and go by feel, or use...
thanks for the info
your info is appriciated, thx. now if I could learn to spell!!!!!
bore is 4.315 thanks Are the gapless rings used by most racers or not in blown alcohol applications, thx
I have a new alcohol motor that came with dyks top ring and an iron second ring. We do not have the gapless rings. Rings are from c/a. We run a...
