Separate names with a comma.
split pan save your money and put the least expensive steel 12 qt. pan you can find.plenty of room for on and off,and best of all when rods end...
Would like to know if any racers or crew members know of a product or household remedy to keep helmet shields from foging up.Tried the spit thing...
miner boost talk to jody stroud,he runs one with a psi makes good boost numbers.
jim got pictures of four rods in the diaper on the third pass on one of jim's motors? I guess it wasn't happy. Could have been them old rods...
oddy's If it's Oddy's in Florida keep looking.I heard they folded up years back. Real #$%^ heads.overthehill
pins I agree with Bob,loose the .990's,go to the hemi pin somewhere around 300 grams,would also check into oil viscosity,preheating the oil,and...
oil restricters We have been running bbc pretty long time and have used restricters and not used them.I prefer to not use them and just add...
450 I don't know how hard your going to spin this motor,however our first engine from Jim Oddy back in 99 had 250lbs.seat presure and after...
Big chiefs there's a lot of good info in these posts and would like to pass on some things we have experenced.we currently run 12 degree...
front main We had a similar problem with the front main. Tried all that has been suggested,swaped crankshafts,problem went away.Don't know which...
head gaskets hello buzz,had the same problems on a 540 and 509 chevy,tried everything,smaller head stud holes,bigger wire,smaller...
Isn't he the guy that use to own or had something to do with Howards?
joe pisano 1&2 I know there has to be someone at venolia or arias that can shed some light on these blocks.I hope Joe passed on some of his...
hitting the rods no sure if i am understanding the question or not,but i would be more concerned about the rods hitting the cam in a -.500...
brads send them to brad he will tell you what you got
glide band Mac,I had problems with wide or mega band.seem to always glaze the center or one of the outer wraps.went back to small band,no...
law firm harry,I know getting burned isn't funny,and can really identify with you.happened to me few years back.fortunately i had pay pal get my...
shorty sco,it would be a lot simpler to swap carriers.take your gears out of the long shaft carrier,reinstall them into a shorty carrier,using...
I recently got a RCD degree wheel and hub assembly that had three of the degree wheel slots or holes filled in solid. The material used to fill...
in the hole i agree with Don :D and So Dak ,shorter rods,put the piston at deck height or in the hole.could also run into valve to piston issues...