Separate names with a comma.
Discusing it with a friend, maybe mechanically move the magneto using something similar to a PSI advance unit but body support would require a...
I still use 168 tooth has anyone here used 139 tooth on a BBC? longer ring gear life? For the 8971-3 start retard, I'll ask again this year at...
I use 12 volt flywheel block mount (bbc) starters with 24 volts to it. So I have enough spinning capability to fire the 44, problem is the starter...
Anyone figure out how to wire a MSD 44 Promag to retard timing during starting?
Is there vendor that makes a support ring\clamp for a MSD 44 magneto that has multiple holes for various support bracket ability? I need...
opinion on which is stronger roll pin setup 1. the double spiral 2. standard roll pin with another smaller diameter inside it.
Yes it was a spiral type. The mag drive is off the front of the engine so no oil pump, just a single MSD 44. I'd like it like a Chrysler hemi...
I sheared the roll pin on my mag base with with a MSD 44 on top, chev type. Has anyone added a key way to the gear and shaft? and still used the...
Who makes a timing pointer setup for MSD 44 that fits well and looks pro?
Darren, I see how you are doing it, I had to go out to the garage and take a look to visualize. Dan, what solenoid is included with Rons? make...
Dan, that Ron's kit does it have a solenoid with it?
Darren are you using this primer valve http://www.goodvibesracing.com/nozzle_bodies.htm#Primer%20Check%20Valve ?
I am not sure on a regular hat nozzle, there is a lot of vacuum inside the hat.
Aerated nozzle as in a standard hat nozzle with nozzle jet?
I like the idea of the unused port in the hat, use a NOS solenoid??? have a pic of your setup? what nozzle and jet did you use? I asked a...
I am fabricating a gasoline primer setup to ease starting, where do you guys and gals add the checkvalve?? port block, hat block or unused...
looks like summers and DMPE have nice products! I still need a crank trigger setup, I currently run a ATI damper they now offer the outer shell...
After some discussion with others I will probably go with a crank trigger. Anyone have some pics of a setup on a BBC with crank support and 3"...
similar to my Pioneer,,, have a pic of the gear that bolts to the cam face?
So you moved the Pioneer gear closer to the cam?
