Separate names with a comma.
Got it. Ours was ground for 2 keys. Good luck this year.
Greg, for what its worth we never had a problem on the Dinosaur with the 7/16 bolt with the small snout and support. Whats going on with yours?...
http://timmcamis.com/Store/index.php?main_page=product_info&products_id=322
we've run one on our blown alcohol sbc for 9 years with no issues. Im with Dave on this ,WHY NOT?
Thanks guys. Looks like the unit Spud sells is just what i was looking for. Thanks again.
looking for a telltail gauge to mount on the distribution bloke at the back of the hat. Anyone no ware to find one. Thanks
Had a similar problem with our car. Finally drilled out the opening on the prime bottle (3/32)and that fixed it. Takes more fuel than you think...
What manifold did you use. We just finished our 18 degree using a carb manifold we modified for our blower app moving the blower back 3 1/2.
Think i found what im looking for at Waterman. thanks.
Anyone use a filter for there port line feed.
Marty, Thanks for the info. Will probably try to sell this trans and look for a newer unit with large sprags. When i needed to go through the...
How much power can they handle. Have a 2300# door car with 600 cid BBC making 900 hp. The trans is a older CS-1 4 speed with fresh clutch pacs and...
X2. Our 3rd member was fine for years but 3 years ago we pulled it out just to take a look and 3 bolts were out far enough to hit the caps and the...
This is what i have but haven't been keeping track of the water grain's, but that is going to...
Our combination responds well to timing changes so that's an option also. We'll have to play with it a bit and see what works the best. I would be...
Thanks for the input on this. It looks like i need to start adding water grans info into my log book and keep better track of how it affects our...
How important is water grain's to your tune-up. I haven't payed that much attention to it in the past but maybe i should. We raced over the...
Thanks. I figured we would probably have to have one made or make our own. I was thinking about a tunnel ram manifold cut down with the blower...
Doe's anyone make a 18 degree cast race manifold for a sbc or will i have to have on made.
been using King HP in our blown sbc for 5 years now with good results. Usially 2 seasons on rod and mains. Good Vibrations Motorsports is a good...