Separate names with a comma.
I am freshening a used cs1 course spline I purchased as a spare and need to know how to determine if the sprags are ok, or if they have been...
I have been told 32 max due to the small combustion chambers.
The bolt pattern & port locations are the same, but it will change the angle of the zoomies. I had a pair of adapters that were cut on an angle to...
I have an Oddys 540 KB/Olds 14* Big chief Motor. I am tearing down for the winter freshen & noticed that the intake pushrods are 7/16 diameter &...
they are older koni double adjustable shocks. I have been running with them set in the middle for adjustment & they have worked fine running our...
I dont want to wring its neck on every pass, Oddy dyno'ed it to 7500 rpm & it made 2345. I would be happy to run in the 6.70- 6.80 range. so like...
Danny, We run a mix of 1/4 & 1/8. I know there is gonna have to be a compromise, but what ratio would work best for both?
As some of you have read & responded to my previous post concerning tire shake, I started thinking about four link locations & that this car was...
Car weight is 2550, bore is 4.500, stroke is 4.250, converter stall is 6000. Tried to put a larger tire, but would not fit a 34.5. I understand...
Ok , I am planning to change the gear ratios in the trans. If I replace one of the 1.44 gearsets with a 1.25, it will give me a 1.80 first gear....
Ok, I do not run an air throttle , but I do have one in the trailer, so I will be installing it. No data aquisition yet, we do videotape every...
Can you recommend a better first gear ratio for my combination?
Mike, we are running a Bruno with a converter. But I think that basically you are saying that I am not leaving with enough power to get up on the...
No beadlocks, tire press. is set at 6.5 cold, no chassis adjustments from the previous baseline,wheelie bars are 65 inches long & 6 inches up to...
Ok, After running consistent 7.50's in my 63 T/S vette all year, we decided turn it up a little & see what would happen. Running a 540 KB/Olds/big...
I run an approx 8x14 cooler in the front of the car. I have seen people run fans on thier coolers. dont know how much it helps. I have actually...
With that much damage, I would definately send the crank out to have it checked. I'm sure you dont want to put a new motor together, only to have...
Yes, it sheared all the bolts off that mount it to the case. I do my burnouts in high gear & have tried shifting from forward to reverse with the...
Thats great! What oil weight were you using before? I am running straight 50 & have been considering switching to a 70.
What block is it?