Separate names with a comma.
attached are 4 photos of how it goes onto chassis. the rear end in the car is a boulton fabbed rear end. i was told it is a boulton chassis but...
i have a dragster that has a axle and also uses a leaf spring on it. who made this set up and is it still available. what feed back on using this...
i have a mag 20 with fie crossover switch and msd powergrid. i can fire motor if i just go straight from magneto. once i hook up the powergrid i...
i have been trying to see if advanced wireless technology is still in business but unable to get in contact with any body. curious to see what...
dark blue to transbrake and light blue not used. and i am using flaming river self powered non adjustable timing light
i have tried to move the mag and somehow it will not allow me to go over 29 degrees even thought i advanced the position of the gernerator. that...
i am having a issue with setting timing on crank trigger , i have set crank trigger to 34 degree and when i check with timing light it is about 29...
looking to see what is available for a small block chevy 23 degree heads intake manifold. using brodex track one heads and present intake does...
yes
i don't believe you have a issue with the height of fuel line causing your problem as we jack the back of our car up and put on jack stands and...
i hooked up a air pressure to all lines found no issues anywhere when using dish soap and water solution. so i removed all the lines from the...
i will check that out later this week and report back
every line and piece have been removed and checked for correct operation. no filter in system as it was removed to insure it was not a issue both...
as we put fuel pump back together we checked to insure correct positioning for cam driven . we have fuel in the line to the bottom inlet at fuel...
yes we took all pieces off fuel system to insure working and not plugged with something. basic we removed entire fuel system took apart pices such...
on both pumps it does the same i get it to fire and twice i let a large 1 litre bottle that was full empty while i bottle fed the motor for 25...
fuel tank is 3/4 full i inserted a hex key to observe that the fuel drive was indeed turning and it is.
car develped a problem as fuel will not suck up from the pump once car fires on primer bottle. car fired normally a week ago on jack stands but...
that is how i got it wired the way you described Will and that red wire that goes to the 7720 box is the one i have to put 12 volts too get...
problem solved after being on the phone with 2 different msd techs we just checked everything like what was said on this post and no luck, however...
