Separate names with a comma.
Think i found my answer.. The shuttle valve seems to be a opposing inlet check valve so when you drop pressurise it will drain the pod.... can...
Can anybody give me any feedback about using a 2 input shuttle valve on the air pod cant get my head around how the shuttle valve vents its air...
Because they are not really in netrual its just a air gap between forward and backward.its selecting either forward or backward that is the risky...
The problem using a pick up of the coil is when you are on the limiter you loose the signal.By using a crank trigger pick up straight to the tacho...
For your tach issue...look at FIE webpage for tech article on build your own rev limiter using the HD FIE relay.It talks about using another crank...
You got to take it apart and count the ring gear,sun gear,planet gears of each section.then can look up ratio chart to check your findings to...
Try disconnect Kill switch to rule out contacts have stuck....seen it happen before
Single button activated shifter for multiple speed lencos. who makes this? and how does it work? the one im after is pneumatic no electronics......
OK Thanks...
Stupid question new to clutches setting up my lenco I found a good deal on a brand new twin plate clutch locally but my car needs a triple disk....
no that upgrade is for msd12 amp mag upgrade to 20 amp...
Thanks, I get it now..
Thanks Mike, Is there a rule of thumb how it calculates the misfire? Is it every ??? Spark doesn't fire or Only takes 1 away from 1 cycle then...
Does anybody know how the ECT limiters 2 step works? I want to know does it retard the timing? I can't see how as the breaker points can't...
Well I just invented a shifter myself. It's for multiple speed lenco using air pods. Is a single stick with no need for valve stack. Not v gate...
Was wondering what options for air shifted lenco are out there... So far I've seen.. Push buttons... Air levers....Tim mcamis style Air...
Need to get some extra bolts for my Cs2 as converting to a 5 speed,forgot to bring bolts with me and im overseas can anybody please tell me the...
Sounds like its Large shaft... the hollow 24 ones dont count its just each end of the inter shaft.the front of the shaft will be 32 and the rear...
x2 I also have a bruno front gear set the rest is 32/27 spline... Another note is Cs2 has 35/32 (large spline) and 32/27 (small spline)...
x2 ProBell 2x bolt patterns..