Separate names with a comma.
Id say that before todays blower mods SSI was the best roots blower around. I worked on a dragster in the early 90's. In 94' 95' we had a early...
What kind of rods? Id use + .001X extra clearance bearings and go for .003 either way and go for .003 .004 on the mains is perfect. Marty...
How about the bag completely cover the reverser (besides a hole for the outshaft and lever) before pulling the straps through, where you would...
Here is what Elmo has to say on the matter.... https://www.youtube.com/watch?v=eC087mmgFEI
http://www.wmco.com/Products/Air-Valves-and-Switches.aspx
http://treracingengines.com/trecarbs.shtml
It turns a green tint if theres much water in it. Marty
I have a hydraulic clutch slave and master cylinder for a funny car in the 60's or 70's. not sure who made it . Its a sealed unit with about 1"...
Maybe the opposite? Like with an aluminum rod if you detonate it the rod bolt can crush the cap down onto the bearing. I have an aluminum 525...
There really isn't much difference they've been using R296/500-16 (336 duration 296@.050 .500 lobe lift 116 lobe separation) in alky funnycars...
Running a 471ci AJ 481X with a whipple at at lower RPM (around 9000 I guess ) these guys put a 286 in 278 ex @ .050 110 lobe separation in @ 106...
7 time IHRA champion Mark Thomas told me 15 yeas ago, that they had been using a 118 spread cam and were thinking about trying 119ls. Of coarse...
I read something I think from WJ years ago, if a faster pitch is coming at you, you have to swing quicker. Marty rock and roll...
Two answer the question 1 & 3 have have around a .050 short rods even in some screw blown Hemi's with the opening in the rear. With chevys they...
with an aluminum block Ive run the pistons out .020 withe a .053 gasket. and the pistons just had a shadow of the head. Marty Creech
What about this head ; http://www.mbellc.com/index.php/component/virtuemart/?page=shop.product_details&flypage=flypage.tpl&product_id=60 or...
32° is strait up. Put it at 41° ; it should Snap Krackle and Pop. Make sure to Plug the Main. Marty Creech
If you are going to bore the lifter bores you really should use a lifter bore trueing fixture....
http://www.spdexhaust.com/HeadersB.html# Look like they might work. Click on zoomies. Marty
http://www.lunatipower.com/ContactLunati.aspx
