Separate names with a comma.
Scott,I was talking with mickey at the PRI show and he told me you were fighting some of the same issues that I was. What rpm are you launching...
Martin,I know how to degree in a cam,but thanks anyway's :cool:
Bob,the two step might be an issue too,I have a electric lean out that we will have in place by the next time out.Just need to find the thread on...
How much difference would a cam be in a big block chevy verses a late model hemi? I ask because my fed ran 6.70's with only 274* duration and...
I guess untill somebody buy's it I'll run it,I don't have much for match races down here in FL.That sucks about the CIFCA,that was a good...
Thank you all for the advice. I guess I will keep this cam in it. Buy a couple new pulley's and a new belt and spin the blower a little harder....
Do you happen to remember how much boost you were making,and you're launch rpm? Thanks.
Any idea what kind of boost # you were getting with that old 14-71? Mine is making 24lb but at what rpm is unknown.and it is pretty tired,I can...
195-210 psi
385 on the seat. 20 amp pro mag @34*
It has been a pig since I built it(the car).Pump is 3 runs fresh from spud miller.I had a 1100 on it before the 110 but removed it as it was...
II have a nostalgia funny car with a 511 kb hemi and powerglide trans.10in converter 5000 rpm stall. 11.5:1 compression,fuel heads,14/71 24lb...
Copy then paste the img ulr from my photobucket account directly to the message. it was pure luck,i am computer stupid.
Glad i could help. there are more pictures of it on my web site. nostalgiaalky.com
Hey Eric,i have a ken cox laydown chassis,i use a lever and morse cable set up. [IMG] [IMG]
worth every penny. port nozzle location on the indy manifold is way better than the littlefield. also the taller manifold makes it close to...
When i originaly looked into the maxxis tires i checked their site and the tires were expensive.When i had one of my local tire places they were...
Ron,i have a 40ft gooseneck with the 15in wheels.when i got it i got a flat everytime i used it.pos goodyear marathon tires.I replaced them all...
I would think it would be hard to weld on them if they were filled.
I built mine in 06 and the only problem i had was it needed a longer parking pawl.