Separate names with a comma.
Thanks for the info guys. This has been a real pain in the a#s. For a little rebuttle to questions asked to me. There are no signs of...
I am running a 565 bbc with a 14-71 blower, after having a new motor built and making 3 passes my flywheel bolts were loose. I use a mezeire pro...
angry neighbors I have the cops at my house at least once a week, These uppety cocksuckers in my neighborhood don't appreciate a good 14-71...
Help, can't get blown alcohol door stuck to the ground, need a good instant center to start with. 565 ci w/ 14/71. 2500# race ready w/ driver....
Who makes a good book to set up suspension? I need one that caters to a blown alcohol door car. I been paying someone to do it but I need to...
8mm, every supplier has belts and pulleys in stock. Unless you are running top fuel they will hold up.
Better put it together first or you will be buying a second one. Same for spacers at the crank and belt tensioner. The shorter the better.
pump I use the mr. gasket. I have a 1 qt. jr dragster tank, which I fill with racing fuel. So I prime on it and then goes to alky. 2 yrs. so...
I'm running a 565 cu. in. Dart BBC. It hac Brodix 2x plus alum. heads. 14-71 bds air loc. Enderle bird catcher. Oddy's .800 lift blower cam...
I you want to I don't care. Thanks for asking
fuel sheets I sent everyone that pm me the 4 sheets I have as a pdf. If u didn't receive one please email me direct @ wilman0069@aol.com. I...
lift I lift mine by the blower intake, still torqued in place. I use a home built plate with all 8 holes being used. Never had a problem. If...
Flow sheets (new from DMPE) I have flow sheets for my new set up from DMPE. Had to lean main and one high speed but no other changes, I've paid...
Did you put the car on the scales after going to a big block?* Don't know much about altereds but it probably will be ill handling if you didn't...
I don't think so, I ran this prime up all last year, so I've learned about long to stay on the switch. But who knows?
No, two were severly snaked and one had a small ripple.
I have double checked all cylinder firing order, all is good. The car is not on any incline, it is actually 6" in the air on my car lift. I will...
It is a Leahy crank trigger. It does have a shiel that grounds to frame. The 8973 came with a shielded wire also that grounds to frame. There...
I know for sure that 4, 6, and 8 are bent. I just pulled the pan to inspect bearings because we were gonna make some test and tunes this weekend....
I am running a crank trigger with the 8973. I prime up the engine on race fuel with small electric pump. Kill the motor with the shut off valve...