Separate names with a comma.
Dave - good to here from you, do you have a number or address? Did not know anyone was this close. Tell Randy any time! Thanks for any info Pmoore
Money Shot - do you have a number or address?
Who do you suggest for getting a block welded back together?? thanks!
Starting line w/convertor For what's its worth - we run blown hemi in a dragster, with B&J three speed w/chance bolt together convertor. Launch...
Anybody heard anything? Rumor - NHRA is looking at a new class in Comp for Blown Dragsters only! A place for fast Top Dragsters that want to go...
Some people use a "crows foot"
Sodak is correct, more fuel in the hat helps the blower. Something else may have been changed. The tune up didn't cause the crash you mentioned,...
When you forget how old the radiator hose is and you start popping burst panels at half track, but are lucky enough to not hurt other parts, pitch...
MANTON is a first class operation, have done business with them several times and will do it again.
The gas cart will do the job and you don't have to worry about keeping the batteries charged or the expense of replacing them. A 2003 model that...
-6 vs. -8 Depends on the gallons /min., the pressure of the pump, the length of the hose & the type of fittings on the ends of the hose. You can...
Speedo We run the same setup only it's blown. We do the burn out in high gear (both buttons in), roll thru the water and hit it, we also use a...
Money Shot - Oil Pressure You didn't say what size line you have between the pan & pump, makes a difference on a Hemi, especially when using 70wt...
Running a Mallory Mag with a Racepak. Almost a box, but not sealed, it is mounted on alum and has alum all around except for one end which is...
Tank to Pump fuel line As noted above, buy the tubing and take to the local muffler shop and have them bend the radius you want -- Big radius --...
Talk with Marty Chance @ Chance Convertors about the bolt together unit. We run one behind a 512 blown KB w/ BAE heads and a B&J three speed in a...
I worked in hydraulic pump manufacturing for years and have looked at a lot of parts that looked like your lifters. The cause was related to two...
Starter Sean70ss, -- We hit the solenoid w12 volts and the starter motor with 24 volts.
Starters Running a GPE starter ( w/o the long nose pilot) and a Reactor Flex Plate w/168 Tooth ring. Reworked the block as you said and the...
How did Paul Page get a job to start with?? He has to be the biggest "Dunce" in the auto sports world. I feel sorry for Mike Dunn as he has to...