Separate names with a comma.
hello Kyle I"m looking for a roots 11,5 or 12" psi blower snout with coupler and shaft. in good shape/ Do you have or know one for sale? psi do...
they do make these anymore, it was part off the Pankl group (include CP/Carillo. was not a very good crank (too hard)
Depends on what lobe lift and rocker arm ratio you have.
you might have the wrong sleeves in the block, solid block sleeves have a bigger O.D than waterblock sleeves.
Fie coils have a little less output tham the msd coils but they last longer while they are oil cooled.
has the mag big or small cap? thx Aart
be sure that your crankbolt/washers is smaller than the centerhole in the pulley.
# NGK R60601-11 sparplugs new $4,- each 170 avaiable $650 for all. # Champion V59C 11mm tapered seat new $2,- each # Crane lifters 95543 and...
The new RCD solenoids don"t last long on 48 volts we put a resistor before the solenoid to lower the voltage to 24 volts. the older aircraft...
stage 1 or stage 2 pump ?
is this still for sale? let me know thx
could you e mail me some pictures to aart010evers@gmail.com
what size has the top opening and how much are the rotors setback top opening any damage cracks or? contact me directly aart010evers@gmail.com
reqew
Could you sent some pictures from the blower and hat to aart010evers@gmail.com what lenght snout. top opening and how much are the rotors setback...
How much for the 4 new rcd 11mm belts, new 84 mm rcd idler and 58 amp. mags? 11mm pulleys are they flat face or offset/centerflange? thx Art
i have some new ones standart mains 9/16 stud with 5/8 step (what position are you llookinf for?
i have a new set crane roller lifters $ 550,-
could you e-mail some pictures off the pump and magdrive to aart010evers@gmail.com thx Aart