Separate names with a comma.
i've heard people say 3'' but thats not enough we have 5'' to run with no problems
blown375 just had a friend that had the same problem. he said there was a small plug, like a freeze plug ,that was loose and loosing pressure in...
i hear falk is bad for sticking.all i've had is knut and never had a sticky blade at idle.
jim is right. start kinda low don't go over 32 .we run a 44 mag on a kb olds with big cheifs and 1471 superman .over 32 degrees is'nt safe.
i hear it takes along time to get one.
i run a chevy with a 44 mag and a csi starter and 2 batteries to get 24 volts .you'll have plenty of cranking power.
i know the dart 360s will make good power.
i've got one of oddys older kb olds motors and he did have to weld a mount on the block to bolt the starter to.
i buy everything for mine at oddys.call and talk to billy 716 674 2500
oh and we also run a 44 mag you'll have alot of cranking power
we run 2 12 volt batteries together to get 24 volts just like your talking about and i've got 2 seperate charging jacks for each battery its like...
now see what you started steve, aka prost632, with that simple to answer question.
i've got a kb olds thats got a bolted saddle in the rear main don't have any trouble with bearing or anything
kb olds anyone here have a good kb olds block they want to sell ?would prefer a 10.7 deck hight if you do call ronnie 434 525 9142 or cell 434...
this is in a outlaw street car.we've been as fast as 420s on street tires with as good as a 1.02 60 foot at 2800 lbs we have'nt had a computer on...
outlaw is right it is easier to deal with seperating the two units.i run a bruno lenco setup 1 1/4 input shaft behind a 526 chevy,big chiefs with...
i've used a littlefield hi helix retro,ssi f rotor,kobelco k9, and now have a superman k9 and have found that the superman builds boost right at...
do you have a clutch or converter maybe you have too much frist gear that was my problem in my pro mod but i had tire shake
