Separate names with a comma.
They did mine earlier this year
Have you tried asking Impact?
Maybe posting a picture of the barrel valve mounted and where it's broken would help
Just to be clear, a pump saver is not a pump loop/sizer, the saver is for when getting off the throttle at high rpm, pump loop/sizer always...
If you're running alcohol, in doing a quick check and assuming no pump sizer, looks like you need around a .215 pill. With your current setup,...
Greg, on mine, I have the pump loop/pump sizer set @ 37 psi with .125 return pill so I can run .075 main pill.
So you've tried 2 different pumps with the same results so chances of 2 bad pumps are pretty high, what kind of line from tank to pump and any...
I know it will sound silly but make sure there is enough fuel in the tank, been there, done that (:
To me, 200 rpm up and down isn't that much specially on marginal tracks and I agree with rb0804 about the zoomies being so laid back. Those front...
I switched over from Valvoline to OnGuard and really like it. I had to use Lucas with the Valvoline to maintain pressure but OnGuard doesn't need...
As a follow up, I tested all the new springs and found one at 8.5 psi, installed it and the idle is great and the response is back, thanks to...
I bought the spring kit from Good Vibrations and it comes with the shims, also, the whole check spring assembly is new.
Yes, blown SBC on alky but with a powerglide. Ever since I ran some bad alky, a series of small stuff have been going bad, the latest is my idle...
Mike; ok, got it and thanks again, and, no general rule of thumb for raising the idle check pressure by, let's say 2 psi, reduce leak down by...
So raising the idle check pressure leans the motor with all things being the same? I would have thought the higher the idle pressure, the more...
In general, does raising the idle check pressure richen the idle system? Also, I understand that the amount of leak down will need to be...
I don't know if I would want rubber soles if on fire.
I use the Impact boots with my driving shoes and am quite happy with them just don't wear them around too much, the bottoms do wear but can be...
Speedway is located at 2845 W Broadway Rd Phoenix, AZ 85041 and have never tried Torco, they're too far from me, I'm on the west side in...
I got the fuel that went bad at Western States Petroleum, it was good when I first got it just didn't last. I went back to my normal supplier...