Separate names with a comma.
gotcha' - Thanks. Us dumb nitrous door car guys don't put the timing back in. So we set phase at max retard.
Also, there is the negative return of so much boost creating so much heat actually eating up any hp gain from the increased boost. You end up...
Why not phase it at the max retard?
I found a company called parker pumper, they make fresh air systems for roundy rounders. The cool part of the system is a modified igloo cooler...
I have also seen them mounted on the bottom side of the tube, this may help with clearance problems
I wish I knew........As it stands right now, nothing. :mad:
Hi Jason, You finally found this place? Sheesh took you long enough. lol
I have sold a few sets on Ebay before, 100 passes on them too. Not sure if you would get more from the recycler. :D
Here it is...... http://www.dragstuff.com/techarticles/reading-alcohol-spark-plugs.html I keep it bookmarked so I can always go for a...
clutch I don't want to sound like a a$$hole, but call crower, they will get you close, but you will want to get more info, gear ratios, type of...
Same here.
I'm with you, does not compute.
You are correct, and you probably never will.
When I ordered my Hans a few years ago, I called them direct, got to talk to a real person, (was not on hold for more than a minute or so) about...
weight Unless you run an aluminum block, or have already done so, to save weight I suggest grinding the exterior of the block down, taking any...
Do the plug readings from these two cylinders confirm that they are cold? (No cad being burnt or blue line)
Good info, can't wait for more.
It has been my understanding that you are supposed to use a rod bolt stretch gauge to achieve proper specs, as most torque wrenches are not...
After each outing we pull plugs and spray WD40 in each cyl and replace spark plug then turn engine over
Call Bob Molinari, he is a sponsor of this site, formerly of Crower. He will get you close 619-628-0109