Separate names with a comma.
Roto Zip Tool Maker Here is a guy that makes a nice roto zip tool for black strips. He also makes some nice hemi rocker shafts at a great price....
Do hemi Brad Anderson exhaust rocker arms fit Alan Johnson stage 2 fuel heads ? Not fat head rockers I know they only fit fat heads. I mean...
Storage I put mine back in the steel drum and then I have a vacuum pump that I put on the drum with a good ball valve. I pull all the air out....
Please Don't Do It That would not be very smart trying to put 12 to 1400 HP through a crank designed to handle 500 HP max. If you like...
Rbs Superchargers Rbs Superchargers
Chrome Moly Grounding a no no Pete9857 I was going to post the same thing ! The reason is chrome moly is a terrible conductor. The...
Thanks Jim And Everyone Else That Replied. I Feel Much Better Knowing That My Stuff Will Work. Will Hanna And This Site Are The Greatest !!!!...
Jim Jim I have blank plugs in the holes. If I could ask you one more question. I was told that if I use 172cc fuel heads on alcohol my car...
Jim Jim So you run dual plug heads on alcohol ??? Are your heads 172cc ???
Yes I have blocked off the other plug hole. I don't have the plug tubes yet but it seems like the plug tube will go in on an angle. And seems...
Will single plug valve covers work on dual plug heads ?? When I look in the plug holes they don't line up with the holes in the valve covers...
Shipping Cost Well I must be honest with you. I don't know about you but I own a chassis shop and charge around $200 Hr. for work done. and...
Shipping ??? That's called Shipping and (HANDLING) Charges. It's not free for the packaging and no ones time is free. Just my 2 cents. If you...
Hoffmans can make it .500 or any other size you like. You just can't beat the finish on hoffmans pins. Just call up bill miller and ask for...
Is the hole tapered ? All blown application pins should be double tapered. If the hole in the pin is straight through I would not use them....
Rack ? I know this has nothing to do with your question but what is holding your rack & pinion in on the left side of the picture. You should...
What hole to block off ??? What hole would you suggest be blocked off on dual plug heads ??? Left or Right ??? or call it Front or Back ???
Brooks Rods As of now no web site for brooks BROOKS ALUMINUM RODS 735 E Debra Ln Anaheim, CA , 92805-6334 Phone: 714-778-3315
Side oilers I run a KB Billet pump. There is no provision for this. Just 3 Lines. 1 Feed from pan. 2 lines to filter. What now ?
Mike Were does the oil feed supply come from for my side oilers on my kb block ?