Separate names with a comma.
Looks like a CRANE cam card ...... Could probably be a starting out 8000 RPM, Nitrous or Blown Alky cam with that duration and 111.5 lobe C/L.
Yeah, no problem ..... just curious. Typically blown alky combo's like 114 to 116 C/L ...... I have no idea what a NA nitro combo uses. Here's...
Is it a symmetrical 285 profile and what's the lobe C/L angle.
Please add the Wheel to Wheel mounting distance, thanks John.
This is not a BRAND recommendation but some technical info. I've got a lazy blown BBC for bracket racing and I found that it needed so much oil in...
I agree with Gordon 100%. Should you decide to run it without good bearing crush I'd start looking for another block because eventually you're...
Their combination was a 555" with a wiz-bang 8-71 on E85, your 469" with an unstripped basic 8-71 could be similar boost numbers but higher boost...
[MEDIA]
Hi Bob, I watched an 8-71 blown 565 BBC video on YouTube last night done by Engine Masters. Some interesting facts about boost, air temps etc, it...
Rob Tucker has a 2 x 25% unit available. http://www.insidetopalcohol.com/threads/cs1-lenco.63452/ [ATTACH]
What bearing clearances and oil pressure/viscosity?
You only need microscopic movement between two similar metals in conjunction with pressure/force and gauling can occur. There will always be some...
Bill, Would a Torrington needle bearing thrust washer between the faces help? They are ~62Rc hardness. TRA-2435 is 1.500" ID x 2.187" OD x 0.030"...
Email sent.
Rob Wendland has some blower belt and pulley setup recommendations on YouTube.
Part # and price please.
Yes, it will operate purely as a scavenge pump delivering oil to the tank but it may not have enough volume capacity. Most dry sump pumps have a...
Good point Chris. The McMaster Carr one was shown as an example ..... maybe find a more heavy duty unit that could accommodate a lanyard or some...
Use two hat nozzle ports (1/8" NPT), fit one with a jet (Ø - TBA) and a 1/8" NPT pneumatic flow control valve in the other port to fine tune idle...
Plumb a double acting air cylinder arrangement into the monitoring circuit. It will need to be one with a larger rod diameter to get the areas...