Separate names with a comma.
My cs1 2 speed is 14.2 inches (360mm) from front face to back of reverser. Does not include rear output shaft
I have broken my 1" Bruno input shaft (cause is tyre shake according to Bruno Snr). in our hemi/psi powered RED. I am upgrading my Coan covertor...
Can anyone PM Bobs number I have tried calling several times on (352) 486-5742 and no answer?
Anyone got a new or good newberry cam 292 296 119.5 cam for sale. Needed for Veney headed hemi Thanks
Excellent thank you Do you silicone at all? I am using flat breather hose which could be part of the problem I think that needs to be replaced...
I have a KB with Veney heads. I am having problems sealing the front manifold valley. I am using a spacer with soft manifold end strips and...
Ignore the last statement about the pressure relief valve as I forgot about the spacers!
Can anyone tell me how much oil goes in the front case of a Fowler F-11 With the F-11 there is no sight glass. Also has anyone had to move the...
Yeah you are right Parry. I had a complete rear end paid for from Texas months ago, but have run into a slight problem. It will get sorted but I...
Thanks but it looks like Ive found what I need
I have an older aerospace rear end with bell end tubes in my rear end dragster. I need to convert it to full floater so I am looking for bell...
I've had two 48v solenoids fail on me. So I used a standard Ford 12v solenoid and ran a separate cable(cable tied to main cables) to one of the...
Thanks Trevor very informative. Using your maths we are running at 3.5
Finally fired engine last night, and after getting enough oil in Bruno (Redline Lightweight ATF), revved to 3000 and we have 210lbs pressure!!...
Thanks, I have had a couple of PMs that I will be following up on
Can you please give me some guidance. Running in RED with 526 hemi running Veney fuel heads approx. 10.4 compression I have just changed my...
Thanks guys, I will remove convertor and get the mounting pads machined less .04
I measured the clearance at .115 in
I bought the car complete, and have only done a few meetings with it. The Bruno has been out of the car after I purchased it to freshen engine but...
I will check