Separate names with a comma.
Yeah, all those nozzles come out at 45 degree angle. The ones I had came straight out the end in a flat fan pattern.
Had a set of straight shot nozzles that had a fan shaped orifice that came straight out of nozzle end. Looking for someone that carries them. They...
Had bad alcohol years ago, would start hard and seemed off 20% on power. Seemed like weak ignition problem. Didn't measure specific gravity ,...
The speedway [moroso] element is 212 watt, the Stefs element is 500 watt. I've used both in drysump tanks. The Stefs element never lasted for me,...
Don't know about problems, but MSD has discontinued the 10+ and 8 boxes, replaced by the 8 plus unit. If you think maybe the 10 Box is causing a...
Is MSD the best place to send a box type ignition or is there somewhere else that's better?
Is the inside diameter [bell] of the bellhousing the same diameter between a trick ti hemi 8 1/8 and a Ford 8 1/8 trick ti bellhousing. Some of...
I had a similar problem, it was the nitrous solenoid. I turned the solenoid around [ switched the IN and OUT ports], never ruined another primer...
O bs Never bought anything from big O, guess it's a certainty that it will remain that way!
Dunn Offset Drive I'd check with Mike Dunn on an offset drive, would not be real expensive.
Anybody had any experience with Titanium Rods on unblown alcohol motor? Do they require maintenance ie rod bolts every so often? I know they are...
Timing Change Had the same thing happen to me, Changed from Mag 20 to 44 and timing was off 10 Degrees. Msd told me my timing light was wrong....
Which is better on natural aspirated Alcohol,Msd says 8 conventional box is good but 10 plus is more modern and more powerful. Seems the older...
I have Heater in the Dry Sump tank,plug it in for a couple hours and looks like new.Check the oil filter on each pass. Oil will last all weekend.
How much water is too much? At what Specific Gravity does it start to affect power? How much does temperature affect reading,do you need Corection...