Separate names with a comma.
So running a blown RED with powerglide, have ran both a 3196 MT and the Hoosier 1500 slick, they like different things. With the MT it wants to...
I’ve ran both the cast iron Merlin 4 and cast dart big M in that power range with no issues. At the top end of that you may start to get some...
Since my Centerline beadlocks are now paperweights (sfi sticker came loose) I am in the market for some new 16x16 beadlocks, sfi 15.1 or higher...
I went from a Trans Specialties spraggless to a Spragged chance. I had better MPH with the sprag, slightly less trans temp with the sprag,...
A good resource is killerrons(James Monroe and Scott), they have a few prochargers running around with the rons setup. I know a lot of the guys...
I had a Milodon cover style 3-gear drive in the early 90’s for BBC. It had oversised dowel holes on both sides with a bunch of offset inserts...
Changed belt type and had to change the idler stand-off to line everything up. Idler is the large 3” with the stacked bearings offset to one...
Do you have a serial number on it? Can you Send some pictures to knemo963@cox.net
What rotor is the SSI?
Still have the Kobelco K9?
moving to a larger blower so going from a MLS style gasket to a copper with o-ringed block/heads. I’m currently at 10.6:1 compression running a...
Thanks for the reply’s, that’s exactly the stuff I’m looking for!
So this is a help me understand thread. I’ve ran a blower for a couple years now and really enjoy learning more and understanding how my...
7/16 (stock size) with the extra lifter valley studs. Was making 17-20 lbs of boost with the 10-71
moving from a 10-71 to a 14-71 blower in my T/D this year so moving from a MLS style gasket to copper and O-rings. My blower guy said since I’m...
Agree T&E or goldrush are probably your safest bet. I have also owned a high end Vintage and it was very well built and never had an ounce of...
I have just under 6 gallons in my blown T/D, usually put about 4 gallons in after a normal run.
I realize that roots blowers Loose efficiency the faster you spin them (going from 28% to 38% overdriven picked up quite a bit less than going...
I've ran a Rev for a few seasons now, really like it. Easy on and off, keep some mobility, no pressure on my collar bones.
Interested in the 3.89 afr. I run a blown BBC, downloaded the free trial and input my info....it shows my AFR based off my best run/setup closer...