Separate names with a comma.
Ya mean like a hula hoop? lol I know the o-ring should stick out 25% of the gasket thickness and have .001 interference and the receiver groove...
And this has what to do with clutches? Sounds like another scam.
Running water isnt a bad idea if you dont mind trying to keep the head gaskets from leaking and dont mind having to run an overflow tank for the...
Thks Dan,appreciate it.
Thks,Dave. I can wait. Appreciate it.
Anyone make a decent one for a early hemi with Titan rockers?
Going to a thicker head gasket is a way,but watch for getting your quench too far out of wack.When the quench gets out of the optimum .040 on a...
What about detonation? I know on a fuel car when it detonates, it will usually break the lifter also.
Sure Bob. Does that mean i get a copy of the new one when it comes out? LOL
Gd one, Bruce.
According to what snyder told me, it is more forgiving on a snotty trk and it has less tendency to shake the tires when low on power. Randy Baker...
If you take .000021367 X 427= .009123709 as an average area. It comes up between a .034 and a .035 nozzle. If it was me, id put in a .034 or a...
If you dont get your pump flowed along with nozzles,your p***ing in the wind.I went thru this once as the pump was only an 0 instead of -1.Even...
First of all,you need a larger line. -12 is min,but -16 is preferable. What is the pump flow and what is the system pressure?Without pressure, it...
that depends. If it doesnt blister the porcelein,id rather have a hotter plug than 1 too cold and try to misfire because of tip temp being too...
Why not? theirs a guy here whos got one on his. I would think around 30 degrees to start and look for the timing mark when the fuel is right.
Thats pretty neat. What were the egts?
Cant believe i got an email from Ken this morn. He says he is back with the living now as he had (domestic probs),so he said he will be available now.
Computer for what? Jetsize will give you the DA when you input the info.
Dont know if you can get ahold of Lowe. Ive tried for several months and no answer.I work for his uncle and no one including his kin seems to be...
