Separate names with a comma.
This is from Matt Moore at Lenco. Do NOT use 60 wt oil use straight 30 wt. Fix all the orings to stop it leaking
Do you know who you talked to at Lenco? We always you straight 30 wt but I will contact my friend at Lenco and let you know what he says. The oil...
Talk to Andy Wilfong at Littlefield. He is a regular on this forum
Doesn't make and difference if RPM or Racepak the same applies to the wires and grounding
The mag can't only fire in six cylinders it has to be the cap or the wires. The mag just fires and keeps on firing. Doesn't know how many...
Make sure the Points Box and the Racepak box are grounded with a wire directly to the chassis. Then make sure none of the Racepak wires, VNET...
As far as I am concerned there are only two trusted Promag 44 techs and that is Leahy at Electrimotion and Bob Wyman at System One. Both will do...
Let me add a few things here. The correct leak down percentage depends on the set poppet spring pressure of the idle return poppet. In other...
Are you using a cross over switch on the crank trigger. If so try it straight on the trigger without it. Also make sure the crank trigger wire...
Usually that is correct unless the cap or rotor is cracked. Do you have a crank trigger then if so is the rotor phasing correct. Is there any...
Do you know what brand mag drive it is? Call RCD and ask them what the spacing should be and they probably have the shins. If it is an RCD drive...
Either your stripes in the blower are new, or your starter is different or starting to fail or the battery is getting weaker. Make sure that crank...
That is correct. Both MSD and Electrimotion sell them.
Make sure the crank trigger air gap is around .045 to .050. Best to use a zip tie as a feeler gauge. Figure this on a 2500 hp motor one degree of...
Interesting article but dated 1992 which is before screw blowers came along plus the material the belts are made of has changed but still some...
That's interesting. Still a top fuel boat which is hard to compare to a blown alcohol promod
Eddie is a top fuel hydro and uses a standard helix blower. Totally different ballgame and can't be really compared to a high helix alcohol promod.
I use this one and it does everything you need http://computech.com/product/raceair-portable-weather-station/
TOL we run a 14 mm with a Whipple screw blower and Two Step. Looks like we are getting more life out of the belt maybe around 10-12 runs. The 14...
As I have said before, there is no winning promod out there with that blower on it. I can tell you for sure if there was we would all be using it.
