Separate names with a comma.
At 3500 rpm the minimum pressure is 100 psi and the max is 250. The standard is 150 psi. Not sure I would go all the way down to 100 psi right...
Wow that was interesting. It really shows the difference between the two different style pumps so now what is confusing to me is which pumps out...
1/8" holes, 7.5" X 3" with a diagonal of 8 1/16" (to check if square). That is center of hole to center of hole. Let me know if you need anything else
Dale, I have never seen or heard of a problem with either. One thing about the RCD unit is it only takes an RCD quill shaft. If you use a PSI...
Cyril, the Simpson X Bandit is a great choice. I don't think you can get anyone better. The fit is really important for safety and comfort because...
Based on my electrical engineering background and what I know about the electromatic interference radiated out by the mag and along the plug wires...
At the aeronaudtical company I worked at they were really strick on how they handled torque wrenches. They had s strick calibration schedule...
If you leave the rocker arms on then some of the valves are open with the springs compressed ant over a 1000 psi and some have valves closed at...
You can loose tension on the valve springs.
Yes, and should release them between races
Delta or pie opening are only used with High Helix blowers. So if yours us a standard helix then the opening will be rectangular.
If I understand your question correctly then the plate opening should be the same as of larger than the opening in the blower. Never smaller.
I agree that we all like cash but selling parts across the USA makes that hard. I have sold and bought stuff with honest people with no problems....
No, I didn't get caught. It sounded fishy from the start. A guy sent me a text about one of the parts I have listed in the classified section and...
Do you maybe mean Castle Engineering? If so try this website http://www.casalev-drive.com
Call RCD Engineering and ask them
Bump. Happy New Year to All
Bump. Happy New Year to all
Bump. Hope everyone has a great New Year
No exact figures to be given but I can tell you it is over twice that. So maybe that is why you can make a belt last. We had more than 20 lbs on...
