Separate names with a comma.
Port O-ring size. No, I am NOT confident about the .030 protrusion from the face. You really should verify that dimension with the head...
Non-matching surfaces The only time I have had a problem with the o-rings sealing between the faces of the intake to manifold was when I...
Fire Dams My fire dams appear to be solid and are flat on the sides, not L shaped. You need to use gaskets to seal the fire dam to the...
Fire Rings All of my AJ2 fuel heads have fire dams. These fire dams take the place of the standard wire and groove. The fire dams are...
Driving me Crazy!! Air in the tires?
To Spray Or Not To Spray Teflon Strips When Storing I have done some research since my last post about what lube to use and whether the $25 a...
Surge and Idle I don't know about anyone elses engines but if I remember correctly, years ago when I built my FIRST blown alcohol engine, I...
Prizm but Different Labeled I just bought ten 12 OZ cans of this blower lube but under a different label off of Ebay. Described as "...
Oil level and temperature Ebay #231289986335
30t pulley Inquiring about the 30tooth 14MM pulley. It this pulley a "GT" or an "HTD" style tooth? Which style is it? Thanks
Oil Level Indicator I made a dipstick arrangement for my brad hemi. Drilled a hole in the block pan rail against the vertical side of the block...
Changing the Ration and the tires I am going to take the wisdom and experience shared on this site and I am planning on going to 4.29 rear...
Pulling timing versus new tires OK, newest revelation. My tires are probably too old and I have ordered new ones today. Going to drive the 112...
Actually, believe it or not, I had that moment of clarity today when I remembered that last night the guy that went to the track with me, (an ex...
Puling Timing Out Didn't Fix It We went back to the outlaw track again last night. Sure enough, the engine still ran well, even on only 7...
Pulling Timing Out I have an 8973 that I am using to pull the timing with a time based curve. It works well for timing control. I have tried...
For the past year, the outlaw track I have been running at has seen less and less traction available for whatever reason. 526 fuel headed hemi 14...
Ignition Problems What are you using for a points box? Any rpm controls? 8973 or other? If you are using a timing computer of any kind, what...
Nozzle Stagger Agreed. OP did not include enough information. I have just never seen anyone post a suggested nozzle stagger on ITA nor would...
Nozzle Stagger As I expected, there are no replies giving up anyones super secret, hard fought and won stagger, sometimes after many many runs...
