Separate names with a comma.
Yea, and Adam has to run him in the semi finals
I have been to the races over in Europe and they are using 92% OD. Also one of the cars Manzo's but bought as a roller. The other car is all...
Congratulations to Jonnie and the entire crew and family. Great run.
The heat range needs to be a -10 or a -11 just for safety to keep the center electrode as cool as possible. It makes no difference to reading the...
Every run if you are tuning the car. If you are sure of the tuneup and it is safe then two runs. Also gap them at .015"
Right around 1/8" to 3/16".
I think you should by a weather station such as a Computech or Kestral that gives you computed Density Altitude and change your main jet...
I highly recommend grinding off the tips right out of the box
How many runs on the sparkplugs? How old are the plug wires, how old is the coil wire? Those two elevations you listed are actual elevations and...
Disagree with you. Popping out the exhaust is a misfire or running so rich that unburned fuel is igniting in the exhaust. Running lean causes...
My understanding is that nitro works better when hot.
No benefit one way or the other. If your lean outs are before the BV then the pressure is a little higher so more fuel will flow through the lean...
Cooling the fuel gives you some extra power. Not sure exactly how much power. Cooling it increases the density of the fuel and also helps cool the...
According to some experts on valve springs the reason the tips break off is due to harmonics oscillation of the springs. This can be caused by...
What motor is it? How were the ring grooves on those pistons? Can the rings rotate freely? Did this just start or did it happen after a refresh?
If you are rich and lazy during the 60ft then you should look at your tuneup. The fuel bypass during the time on the Two Step is there to stop...
So how many runs did you get before the shock absorber was installed? Like I said if you use the Lenco quill shafts you won't break them as...
You will not break a quill shaft if you usd a Lenco quill shaft and they are only $150. I am a lot more interested in Darren's statement about...
Aort,I understand the way around you did it but the crank triggers fail on a too often basis and I am saying that if you are running a trigger...
That's exactly why you have to have a change over switch. Nothing like pulling up to start in the finals and it will not. Been there and done...
