Separate names with a comma.
I would not start any motor with cold 70 weight oil. I would recommend that the oil always is preheated to 90-95* before an engine start. One...
Never tried it. No reason to with MSD ProMag with all the options available. It would seem to me that it wouldn't be very accurate.
Brandon, I agree that one's fate is decided somewhere before the 330 and somewhere after to 60 and probably closer to the 60. The problem is those...
I am only talking blown alcohol here. It maybe so but I have never seen a change but I guess that depends on if the base ting was good or not or...
I believe that most all ET is made by the 330' mark and very little after that. You can lose ET if something goes wrong after the 330 but most...
Hey JP did you get my PM? It would be easier to email me direct mike.c@mindspring.com
If you just one to pull out one set amount then a MSD 8168 by itself allows you to use a single retard chip. If you need more timing retard then...
What ignition system do you have?
Looking for a good PSI "C" blower complete with plate, quill shaft, modified barrel valve, and injector hat for ProMod. You can contact me...
One incident was at Santa Pod where a spectator was killed. The clutch sits further back in the can where the liner is and works well to contain a...
From what I understand that spectator that was killed is what triggered all this. I think it is a good deal. We will get it done and move on.
According to Trick they say their new cans will work with a 168 tooth starter ring.
Let me add to that. Just got off the phone to Trick Ti. Yes over the last year and a half new Trick cans had a double diameter liner so they did...
I am not sure that the can companies are planning to do anything to help because they don't want to pay all that money for SFI testing. That is...
It could be a problem because the engine will spin over at less of an rpm. I guess if you are using 24 volts the maybe no problem but maybe a...
Check your PMs
Trick Titanium will NOT now recert a can unless the new design liner is installed. You have no choice but to replace the starter ring if the can...
Pete it would be a great choice to replace the Mallory with the 20. With the 20 you would have to retard your ignition about three degrees from...
I know several cars with that Promag and they have no problems. Are you having a problem?
The only way a bolt could bend is if it lost torque. If a bolt is at the correct stretch and all the threads are in contact then it can't bend....
