Separate names with a comma.
Ditto on all ideas so far and to add one is take the filter out that filters the oil going back into the tank. You should have the filter between...
Have you ever tried more oil pressure ? I know that's not always the answer, and you need to be careful that you don't pump the tank dry, volume...
Do the top inserts look like the bottoms in the pics ?
Does the end play stay the same as you find the bearings like this or are the thrust faces of the center main damaged also ?
I'm not sure about the 65lbs at idle deal and 140 at 8300--------------- if you are running a dry sump hemi with a P+P pump ?? Something is not...
That's my point, they are not pounded out------- if they were the bevel on the edges would show distortion , flattened surfaces, Do you have a...
That is interesting as when looking at the bevels on each side of the bearings they appear to be good as far as not being smashed or pushed out of...
I'll take a pic today and post it.
Ora Vasquez makes a GOOD one, handles 500 lb on the seat , no problem--- I don't have a contact number, someone here might ?
Glad to hear that ---
Setup your lever in the cockpit to operate the opposite way---- that when the fuel is on the lever on the shutoff is in the down...
Took the words right out of my mouth ! What does he want , a hug ?
It would until I changed head gasket thickness----------
I hear ya Will :p
Thanks for sharing that Pat :cool:
I am looking to switch the black foam material in my end seal setup on a BAE block--- anybody have info on a good source of material that will...
Absolutely not , if he didn't call within a couple days after receiving it ---- too bad. That's just childish to expect a full refund.
The bearings are std , .010 under etc. You need to have the journal ground to the right number--- not the other way around---- if it was me I...
Does the center hole in the pulley fit snug onto the crank hub or is there some play ??? There should be very little clearance there if there's...
Unplug the two or three wire plug from the mag to the coil--- hook your alligator clips on the leads coming out of the mag----------
