Separate names with a comma.
A couple of things. Hook up the laptop and with the ignition on and motor NOT running look at the MONITOR in the upper left quadrant of the...
Yes, it works. Helps prolond the life of the stripes in the blower, helps reduce friction and heat, helps seal the blower. Dave Lowe...
The oil supply has to keep up with the pump or it will have cavitation. It takes a lot of oil to keep up with today's high volume pumps at the...
Well I live and learn something new everyday. I didn't realize that on a Time Retard it took that timing out on the startup. I have never tuned a...
Because a hemi needs high oil pressure and the pump is drawing a lot of oil to be able to pressurize it there needs to be a large pickup system...
It will work but in my opinion it is not enough flow
a -20 line adapted to a -16 fitting flows as a -16 line. Look at it like the smallest orifice in the complete line is a jet that is restricting...
Yes, you are correct that if you use Time Retard vice Launch Retard then when you depress the transbrake button and put 12 volts on the blue wire...
If that don't work then you need a large magnet and you rub the wrenches in a circular motion across the magnet. If you pull the wrench across the...
It will ONLY show different timing if you have a timing curve set up at your idle RPM in the Launch Retard Graph or in the Run Retard Graph on the...
Thats old especially if they sat around with methanol or WD40 in them even if the car was not used. Maybe time to replace them. I was going to...
You can try blowing high pressure air through it in the direction of fuel flow and see what happens. How old are those lines? Yes after that kind...
Yes it would have gotten hotter. The reason the groundstrap was gone and the porcelein was broken was because it went into severe detonation on...
Well then you can do it all from reading the plugs. You don't have to use eight new ones everytime you can use just two at a time until you start...
Where do the EGTs peak at the end of the run? Is this a HH blower or a standard helix blower. How much boost are you seeing at 8000 in high gear,...
No you don't need the Step Retards wired up. For what you want as a minimum you need: BLACK to ground, RED to 12 volt, VIOLET/GREEN to mag, DARK...
CSR has never charged me for calibration only for shipping. Yes it is very cheap.
That is the way I was taught and the way I do all of them. It gives me a definitive point with repeatability
We call it crack pressure. If I want 55 psi then I want it to start just passing air at 55 psi. The first bubbles in you water start at 55 psi.
Wow, MagnaFuel has one for $32.95. Part number MP-6208 http://www.summitracing.com/parts/MRF-MP-6208/
