Separate names with a comma.
You will need an offset mag drive or better yet move it to the front with a RCD adapter. You haven't said what your goals are but if you are...
Here is one place for test fluids. http://www.rockvalleyoil.com/cf.html 1: I use methanol after trying just about everything available off the...
I'm with Mike, Had that happen. Thought it sounded odd once running but made the pass. No spare, came home. Took it apart and the armature was...
Cap your returns. You can leak through the BV with the nozzles in place. Dave Koehler http://www.koehlerinjection.com
Perhaps studs and nuts would do better? Dave Koehler http://www.koehlerinjection.com
The 7 box will work ...up to a point. Someday you will switch to a mag and be kicking yourself wondering what took you so long. I know the...
You probably already know this. Dart block, top shelf forged crank, aluminum rods, front crank support, MSD 12 minimum and decent heads. None of...
Mr. Miersch It might be of benefit to get your websites working.
Sodak, what nitro bandit is trying to say is....no. All that stuff you are looking at are aftermarket items. Are you saying you have 2 mallory...
I have come to the conclusion that magazines sell collectors. I have also come to believe the only place they might be of benefit is an under...
I'm assuming he is retarding the timing because the gearing is wrong, the track is junk, too much HP, all the above. He could try old school. Drag...
What about one of the board sponsors, Autometer? (look up) Looks like they teamed up with Stack systems. They really need to get more info on...
80a with no trailing number = current 80a-1. Factory rated at 7gpm. Dave Koehler http://www.koehlerinjection.com
Since the parts you have are in line with a blown gas street machine how about putting the blower on 10-15% under, with a couple of carbs on top?...
Whatever you try to do I would not push the parts you have beyond 600 HP. 500 would be better.
Well...hmmm..tall order. Your weakest point at the moment is that block. Keep it under 600-700 ponies and it will live .... for a while. See the...
Shawn, I have a fancy MAC TL89 that I have used a couple of times on the wife's car. I could part with it. If that is of interest, email me....
I was envisioning a hurry up scenario where the dry ice wasn't consumed and blocked the tank outlet. Pretty sure the pumps weren't designed to...
Ok, You are describing one of those offset bolts (meaning it's impossible). Make a stud or bore out the hub. Dave Koehler...
You probably read the pitch wrong. Can't imagine Lunati coming up with something that odd ball, not even by mistake. The cure in the end would be...
