Separate names with a comma.
dribblers How would I install nozzles in the back of the injector? The C/F is not that thick also I would need to see some picks of how you guy...
chute launcher WOW How fast are you running? I would call a chassis builder McKinney/ Uhara /Precision / Pro Start / or Mondon. He supports this...
pulleys/ belts Good Vibrations or RBS Superchargers. Both will help you out Don
port nozzels/ case nozzels I haven't run a PSI screw since I stopped running TAD about 6 years ago. Couldn't keep up with the A-Fuel cars with...
I ran all 4 ball check's set at 7 lbs on my PSI with 80's in my TAD with a clutch. for the idle,But the I ran 16 port nozzles ,too. With my...
Tires Hi Frank Most of the Alky guy only get around 15 then they get a new set. I am sure alot of people will disagree, But talk to the TAFC...
timming If the cam was made for what your combo is, start it out with what the manf. ground it to If after you make all your tune-up changes and...
clearance Thrust bearing clearance .012 /,014 is what I shoot for. Don
blowers Thanks Mike, I have all that. Just need an injector. Dont really follow outlaw cars, just have seen a few test and wasnt real impressed....
blowers Thanks Will. I know it is easier on the bearings, Ran TAD for 5 years. Just wasn,t sure about this stuff. I see these outlaw cars and...
Just got back from the Dutch Classic @ Maple Grove. I won,t get into specks But I was wondering if a PSI D will run as good as my roots , with a...
chevy block If you are going to get a different block, get a tall deck. They really like the longer rod.no matter what stroke you run.And you can...
If you bought the right box, it has a rev limiter. port for a chip. If you are using it, you can run a rpm box from it. Don
pistons + Rods You will get a ton of opinions on that one. Mine is JE, for pistons and R&R or Hussey for Rods. But all I can say is what works...
mag parts They Dow 7 coat them, But dont run any mag. parts in constant fuel flow, lines fittings etc. Found out the hard way. As usual, thought...
tires I put old tires on the car when traveling or sitting. But mine loose there air all by themselves, + I just put air in them when ready to...
Heres one I was thinking about, besides the weight difference, does one help more with harmonics than the other ? Don,t be afraid to chime in. I...
2 step doesn,t matter what motor it is. you need to keep that extra fuel away. or you will be asking why my stuff is all over the starting line...
six shooter The first chip is idle. then it changes from there. Don
rpm I leave at a little above idle. and I run a small motor. It is a hard question to answer, since so many factors change set ups. Tires,...
