Separate names with a comma.
we run a screw on a outlaw pm 1/8 mile we run 34.5 tires and 4.86 rear 1.63 1st gear 3 spd lenco with clutch mike must be refering to a roots set up
what type of heads and what is the total area of fuel system
Egr fill holes We use hard bock or moroso block filler to fill in the factory egr passages in iron chevy heads has worked great for years thanks
rodeck It can not be much for 500 bucks expect to pay 2000-2800 for a good used aluminum sb the older rodeck blocks were bad about cracking from...
crazy thats crazy the builders that grind off numbers like they have hit gold do business with a professional shop or cam company they will grind...
i would like to get a copy of whipple manual from someone if they have thanks
what pill size range if runing a bypass on 2 step also how many gpm on two step do you like to see
how much timing are you pulling out at hit if any on clutch cars i know weight tire gear ratio etc all play in just in general thanks
if length of shaft is a problem just use a m99 hvs mel pump it uses a sbc length shaft so no length problems and the pump has same gear sets as bb...
i have a screw leave around 5000 rpm on two step it builds 40 pounds of boost is that in the range that most of you guys have on two step thanks
trays williams mfg will build you any tray you would like at a great price he also builds oilpans and valvecovers give him a call at 951-245-7144
saddle we have saddles to fit your applicationif you still need thanks
It Has A 2 Wire Output Like Most Other Flow Meters. It Uses A Magnetic Pick Up That Produces Pulses Per Gallon
we manufacture a meter with #10 ends 2 gal min to 17 gal min 54 hz range @ 2 gpm 918 hz @ 17 gpm $600.00
bodies are made in lavonia mi the building behind the engine shop try calling the main office number 734-779-7000 thanks
saddle i have several diff sizes 50 bucks plus shipping pm me if still need
where can i purchase a inexpensive check valve #4 to go in my line to boost gauge so it will hold boost pressure on gauge thanks
does a whipple react more like a roots or a psi when it comes to fuel lean outs i know most psi screws do not use high speed lean outs and roots...
crower crower cranks are one of several cranks that are a great crank be shure you buy a crank that has large center counterweights crower...
