Separate names with a comma.
Buy a billet head with steal guides and insert washers pressed into the head. A one piece rocker stand assemble helps also. Cast heads with small...
Yes, both of my transmissions have them also.
You can set the o-ring OD at 4.800 with a .041 wire and leave it out .012 to .014. Put a reciever groove to match with a .048 width and .010...
Frankie Taylor runs a Jeffers car. Always a strong runner.
Great job guy's.
If you lose the exhaust rocker, the intake has a hard time opening that big old valve under extreme pressure. That normaly bend are breaks...
With a convertor and 44% on the rear might be a tuff job. Not sure what gear ratio's are avalible for a glide, but 1st gear ratio and timing...
I have a customer with a T/D that runs a blown SB. He runs GRP's and changes then once a year. 80+ passes. Been doing this for three years. Car...
Another thing to look for is a out of round cylinder are a intake leak that can suck oil at idle are after the burnout. Oil in the cylinder will...
The Brodix and Dart heads seem to hold up better than the cheaper {and lighter weight} heads out there. It's not uncommon for a quick 16/ Top...
Last time I seen that dude he was selling T-shirts at State Capitol Dragway in Baton Rouge La. We were out testing and he came over like a BS...
You can run the Clevite H-series as long as the tuneup is good. I would recomend pulling the pan after a couple races to check things out and keep...
Just to let everyone know, I recieved my t-shirt order from Danny @ T-SHIRT TECHNOLOGYS and they came out great. Nice guy to deal with, advertises...
Just to let everyone know, I recieved my t-shirt order from Danny @ T-SHIRTS TECHNOLOGYS and they came out great. Nice guy to deal with,...
On a site that i full of Screw Blown and Nitro injected race engines, that thing looks like a total waist of time and money. If you burn a plug...
Bruce, I ran a 33 and 74 on my D rotor setup with a 1600 belt. I run a 33 and 69 with the C.
I'm having second thoughts about giving up that blower!!! Good job guys. 1st round win with a 5.67, WOW!
Thank's for the HP to boost numbers, Mike. I wouldn't think the HP numbers would go up that much. Thats why I recommend the .3 per pound deal and...
I'm sure it would make a difference if your going from 10# to 20# are from 30# to 40#. Either way, 10# would be a major HP gain. I would estimate...
I think if both of them engines are built for drag racing and turn them 8000+ and some how get that AJ engine to only make a 1000 HP, they would...
