Separate names with a comma.
washers I used the copper ones from a set of index washers from my chev. days. If you have a set of used ones then use them. I never use new...
I didn't know there was any cheap oil anymore. I would say aver. $40 + a case Don
mag I rally can't give you what you are looking for, but anything that gets hot like that is not normal. I think most of the guy's that run the...
tags The way I read it is if it is for IHRA racing, + it is not factory crimped, you do not need it tagged. I am sure I read it wrong. But you...
oil line Hyatt racing services
pump inlet you can try the fitting Enderly sells , I don't know where you live, but you can try race car solutions in florida. use them alot....
Reverser I want to thank everyone. Just thinkng of a spare . without going directly to leno Thanks Don
reverser Thank you Don
Bruno Brake Line lock is fine, but you are not fixing the problem. Find out what is causing it. How else will you learn. Good luck
questions Camshaft grove
Mike Kopcheck from Rage fuel systems called me Saturday. He makes a piece so you can adj. the pressure. Got one coming. He makes them for KB pumps...
torque good luck. That H-11 stuff is way different. Don
rod bolt torque 776 is right ' but there is not a rod manf. that I know of that doesn't tell you to torque there bolts with 30 wt. oil. also they...
rods Sorry, but 9500 main't shit. Don
RPM's Don't know who's rods you have, but 10000 + is not uncommon for the Blown TAD cars. If you don't feel comfortable take the out and check...
shim spring Thank you Guys, put a .073 washer in there. Thanks Don
rims Don't want to give you bad info, but I would assume you could get a 12 in tire on them. don
Is the reverser the same as used on a cs2?
I want to get 10 or 15 lbs more. has anyone put shims behind the springs, or is there different spring pressures? I would assume the shim would...
pins JE made me some. needed comp height + pin length. But they were there pistons. I remember a few years back Doug Herbert would make some. but...
