Separate names with a comma.
Yes, but I'm not sure all reversers have a neutral position, think the slider(?not sure thats the correct term) gear has to be machined for a...
After I tore mine up last fall, I heard just the opposite, that it was better to go into reverse with the trannies in low, now I'm really...
JS, Not sure why but Snyder only sells the 2-speeds with either a 1.56 or 1.73 first gear, at least according to the web site. I do know the...
Hey Mike, Don't know the run times yet, but since its Goodguys you know it will be "hurry up and wait" so as soon as I find out I'll let you...
Hey Mike, Saturday and Sunday would be great, if you can make it. Friday will be a little more relaxed and I can probably find someone to handle...
Hey Mike, if you want to hang around, I don't have a crew for Indy, the two guys that help me are going on the Hot Rod Power tour and can't make...
Hey Mike, http://www.sassyengines.com/ They carry most everything for Veney heads. How's the project coming? Miss seeing you guys.
Danny, It kind of depends on what size pan you've got, if it's a 3x5 funny car pan, you will more than likely suck it dry unless you overfill it,...
Rob, keep in mind you're only taking out half of .068 in actual material removal from each side. (Actually .062" +/- pin fit)
Just checking to make sure, do you have a loop line for the cooler inlet and outlet fittings? You have to complete the circuit whether you're...
Danny, I have to run dry sump in my altered because I've got so little ground clearance and have to run a shallow pan. I ran the same engine...
Yeah we did, but were a lot more fortunate than some, just lost carpet and drywall, have several friends in and around Nashville that have lost...
Well, between my son being hospitalized and the flooding events of the last week, I guess I'm brain-dead right now, but you absolutely right, it...
That's not entirely true, the two lugs and locknuts are for band retention, and do have to be adjusted so that the lugs don't push the band into...
Larry, I bought two of them in 2005, one is still new in the box, never opened up. What stroke are you looking for?
600# plus or minus 50# ballpark.
The Bruno gives you the flexibilty to run a CS-1 or CS-2 where the L-drive has to use a CS-2 if you need to add a second unit to run a 3-speed....
A raised cam block gives you a little more leeway on stroke, I'm running 4.625" in mine, with right profile on rods you might go as much as 4.750"...
