Separate names with a comma.
We are getting a new crank made and have a few questions. What % of overbalance do you figure in when getting a bobweight on a blower motor, if...
A good taunting. Because I can never build a (normal) motor. Long stroke and std cam highth and mopar rods have clearance problems between...
Stroke Need 4.500 stroke, but the wierd thing is the 2.200 rod journals. I talked to Crower, and (others) yesterday, and their the only...
I'm wanting to hear what you guys thought of Crower's crankshafts in a blown motor, 1500hp, mopar.
I dont have any pictures, but this is what we did. We put together a small container and hose to fit a nozzle, fill it and put the same amount...
I'm looking for a short stroke sbc crank, with a bbc post, 400 mains, for no more than 1000hp 6-71 motor. Does anyone stock such an item?
Good to see someone else crazy enough to run a wedge motor. We run a 572" wedge with an std 8-71. The bearing #s that I have are MS-1277HG...
My high speed is set at 130psi, and it does open. Ran the same bypass 3 years on a NA motor and one year on a blower motor, still working.
There are several rod makers with very good stuff. I run about the same deal, 2.200 pinned mopar 7.000 long, I always use R&R pro rods, quick...
I use that exact bypass and it works great for me, I think Don is right, they do sell a better one now. It works just like a pressure...
Yea I use a new one, only have 15, 8500 rpm passes on it though
Solid KB-5, wedge, water in heads, cold .012 hot .022-.024.
Same here.
Yea, my dowel pins fit good and tight.
We took my heads off today, and the gaskets looked good, had a little discoloring between 4-6 and 3-5, no signs of material movement though.
Just wondering what people think of these new lifters, are they any good? We had their Endure-X lifters in there last year and I'm not happy...
No sealants for combustion pressure, just a little silicone for water, the water holes dont quite match my heads.
Yea, I would bet it didnt have enough clearance in the gears.
I tried the cometic gaskets in my motor (572" mopar with 16-20 psi), I couldnt get them seal water. My sleeves stick out of the deck .004 and they...
With the 8mm, your overdrive choices are almost endless, and if you buy good belts they are very tough.
