Separate names with a comma.
According to the conversation between me and the dot at 12:30AM in the parking lot:eek:,,, Its not IF you make money, its IF you get a prize of...
We've had this conversation before, search the forum.
I have only had this same problem very recently so I have been thinking of ideas. We could; 1-put fuel dams on the port floor 2-move the...
We are all familiar with the markings that indicate grade 5 or 8, there is also usually an identification marking, examples would be a triangle or...
Is the cylinder heat even at full throttle?
Thrust bearing In regards to the thrust bearing. Some engine builders and tractor manuals (like AllisChalmers ect) apply forward psi to the...
It seems you have 2 things you don't yet know, rod length and piston pin height. The basic formula is; Deck Height - (stroke/2) - Rod length =...
Is the outlet of the blower a large opening or a pie shape?
Jim R. from Enderle rec'd the -10 when I asked him about it several yrs ago. You don't want to be way too big or way too small when choosing this,...
I like that fact that there is only 1 line that connects the blower and the intake manifold, its quicker disassembly than taking all the port...
What does he do, rebuilds, modifies, builds new ones? Where is he located? how do they compare to PSI, SSI, LF, DMPE?
Dad has wore out a couple brand new pickups in his life pulling trailers, we too starting putting pencil to paper and realized a used semi can be...
Tell us about Hammer Superchargers.
What block and cap style? Are the caps tight in the registers? The fretting makes for high spots on the mating surface, this needs to be fixed....
John we used to run figure 8's on our blown BBC. If I were you I'd run the wire in the head and the reciever in the block. I'm talking 7/16 head...
I called Arias yesterday and for a 4.5 bore they said .037 and .025. Which is what my last motor is set at. I spoke to a lady but forget her...
What do guys think about heat treating aluminum? Does it change your answer if its a cast alum piece or billet? We've never had any of our...
Thanks, totally understand:)
Please explain this more
Assuming you've had experience with the 400 moly finish while using Hellfire rings, what were some of the symptoms? oil on plugs, smoke out the...
