Separate names with a comma.
Aircraft =AN #'s in 1/16th increments....... -3 = 3/16" -4 = 1/4" -5 = 5/16" (bolts, but no common fittings) -6 = 3/8" on and on -20 =...
??? John; same reasoning as your fuel system or brake line, 1/4" doesn't belong there either, especially hose. i.e. you want volume to your...
No, use nothing larger than -3! 1/4" gives volume, but less pressure. And yes, then you can "T" it to the valves. Bob
Mike is right, .275-.280 should be minumum, as they are probably "harder than woodpecker lips" by the time they get that thin! Randy is also...
SAE filter On three different flow benches I've had access to, you will NOT find any change with anything, including pressure. One thing to...
Ken; I followed the coverage, but still don't know if you guys ran NHRA screw rules for the "exhibition" class, after IHRA put the class in the...
SAE filter Mike; mfg.'d by Specialty Automotive Eng. (SAE-Barry Little) 714-972-8006 also sold by RBS and Wizard.
Frank/Luke; If I remember right, there are problems with both, but of course, easy for you to get there (not here). The "EG" is a very small...
Good job Will, to put a 1st time guy in the final looked good, with a 5.37 along the way! And great showings from Timo's tractor motored TMD...
Chase; that line "thanks for the support" leads me to believe that you will have a job, I certainly hope so! You've devoted a lifetime to this...
most here don't care..... Ken; closer reading says they bought the electronics and motorcycle cam stuff, NOT automotive cam and valvetrain stuff....
Mike; that's good to hear. At your age, you know a lot about leaks and stuff leaking.
B.V. Leak Mike, Eli, and anyone else who may care: We all know a system should be flowed and a GPM number established for idle. As this thread...
Mike; give me some more guns and a few canons to jump over........ I'll go with Ken Sitko as a dead nuts starting point. Without my Jetsize...
P&p Mr. Price and all else looking for P&P- Steve Plueger oil system and every part he ever made for the systems has been sold to RCD. Steve...
Ta/fc 1.25" tf/fc 1.50"
i be dummer Jeee, i hop i donnt gett know dummer. >Fsi< delete< sFI -Arnnie tolld me i wass dumm abot "heet treeting", now i mighte gett...
Mr. Price; most do run a one way valve made by Plueger +562-943-1595 fax +562-943-1216, about $50. Get the 3/4". Those that don't run them,...
It will depend on the housing opening and brand. If it's a stock Ford housing center, either big or small housing, it may not clear the ring...
Tim; as long as it's still under 40" overhang, they probably won't care if it's through the body. But, in all my days of NHRA racing, they always...
