Separate names with a comma.
Bearing WOW, Not even going to touch this one. Don
Brooks This has been going on for awhile now. Did you get satisfaction? You said they called and will make it good. Let us know how it was...
filler When I used iron blocks, always filled them to the bottom of pump holes. I ran tall deck truck blocks. The weight was more, but the...
Lencodrive You will need a shifter for the reverser with neutral safety switch. I guess Snyder can point you in the right direction. Don
On a Johnny West /MSD air kill switch My question is on the switch, does the top air port come from the air bottle and the bottom go to the box,...
Rods I do know how you feel, but don't complain when they are hanging out of the block, broke cam heads etc. There is no race that important to...
Converter box Use the port from your 44 points box. or one off your retard box. Never could keep one of those converters alive. Haven,t used one...
24 volts I have a hard time wiring my light switch, but I think DMPE sells something that gives you 24 volts to start the car then you can run 12...
Boom That is something we all have experienced from time to time. and we all have it in the back of our minds, Don
Blades Check your blades with the motor off and the throttle cable disconnected. if they stick then, the blades may not be centered. the shaft...
Coating I machined the tops of my A-Fuel pistons for use in my blown motor. Because I couldn't sell them @ a honest price. Have 3 sets, I run...
I think the oven is set somewhere between 350/ 400 degrees. I don' think I would. But then again I have powder coated alum fittings. Good luck Don
Starter Call Meziere (Dig deep when you buy the stuff.) You will need to mount the starter to the mid plate Depends on how much room you have and...
70 over call Jon @ DMPE in New York. He will help you out, and tell you what you can and can't do. Office # 1-716-832-7583/ e-mail...
Rods Throw them away, doesn't matter who's they are. one nick can cause a weak spot. They are cheap compared to the carnage they can create. Don
Block Weston Machine in NJ. Don
oil lines I run a -20 from the pan to the pump. But from the pump most people run -10 /-12 Like fuel lines, there are large pressure drops when...
burst pannel I use a gasket. always order a few extras. But do not install it dry. Don
Bearing Call Lenco. We ran one in our Chevy, 3 speed Lenco and 3 disk clutch. Don
Rage His fuel pumps are aw-sum. Are you asking about flowing a system? PM me if you like. Don donimus333@yahoo.com
