Separate names with a comma.
Im new to blowers, I started my motor for the first time yesterday and everything was good. I run 8 hat nozzels and port nozzles, at an idle...
Yea, I just put a RCD belt guard on, I like it alot. RCD had good stuff and reasonable pricing.
I dont run an altered, but I've run a straight axle under my nostalgia door car for years. It likes alot of caster, around 12* and we run very...
Just my opinion, the three gear is the only gear drive to use. Just wondering why you want two idler gears.
Ok, thanks guys, looks like I wasnt too far off.
Just a simple question, what is the torque spec for a 1/2" L-19 flywheel bolt. I just have a feeling I have been under torquing them. Do you...
KB isn't exactly out of business, I talked to Ken just a few days ago, the doors are still open, but he laid everyone off and is running the shop...
I will have to give you a call. I just bought an enderle 110, its new and never ran, the guy told me it flowed 13gpm, but I dont know what...
Ive never been around a hemi, but Ive had this same thing happen to me.
I stumbled on a set of his used rods at a swap meet, ran them for 3 years, never had a problem, granted, Im not making 3000 hp, but I put alot of...
I would think the best place to put a pressure sensor would be between the barrel valve and the nozzles, like in the distribution block for the...
Flourocarbon / Viton - Gasoline ONLY Nitrile / Buna-N - Methanol or gasoline - NO NITRO Ethylene propylene / EP or EPDM -...
Just a simple thought, is the motor on the grinder wired 240 or 480 volt, most 3 phase motors are a 9 wire lead, so you can switch from low to...
Thanks for the info everyone, it all helps.
Ok, I was thinking more pressure would help atomization, I think im going with alot bigger pump. This is a nostalgia car so im using a hopped...
Checking spring pressure The shop that assembles my heads checks the spring pressure the same way you discribed, using a retainer, but what im...
Just wanting to run a few things by you guys. 1 Im building a low boost alky 28% over 8-71, 12 to 1 static comp, 572" mopar, Im wondering...
I run a 3100lb door car, 31.25"x12"X15"s, we run between 8.5 and 9.5 psi, our tires look really wrinkly but they seem happy with it, Ive tried...
I ended up just making one for my KB.
Back when I started drag racing I built a 440" mopar wedge, because it was fairly cheap per cubic inch. I ran stock rods and crank, cheap TRW...
