Separate names with a comma.
First order of business would be alky set up with 1471 hi helix and MSD44, run that for fun while looking towards N/FC down the road. Might never...
Thanks 378 I know I need to get some more info so I can ask better questions. This motor just came out of a big show T/F car. They threw in 1...
New to hemi stuff. I've purchased a TFX big bore billet block, bryant 4.14 crank and AJ stage 5 fuel heads. The bore is 4.375 and I'm looking for...
Mike, yours was infered mine was exact :p Also have seen the air fitting for the boost line crack and vent that way as well. Mike I'm going...
Before you start leaning the motor, putting more OD to it or having it restripped consider my recent experience. We we ran 1471 hi helix @ 29...
No problem on the rounding:) The questions that remain are; How many Impact 15/20 suits were produced during the time identified? Has...
Buddy your math is a bit off. A percentage is a percentage. 1 out 5 doesn't change to 1 out of 50 on a percentage basis just becuase you go from...
System 1 between the tank and barrel valve. I don't know any N/TF car without one. These guys are pump poor so I doubt the filter takes much if...
[ We found no record of your suit being returned for inspection Mr. Putz. We did in fact receive about 70% of those contacted and upon inspection...
Besides keyways and such which is the best roller lifter for standard BBC + 300? I'm running a good bit of spring pressure but rpm's are 8,000...
I had them (Cometic's) on a 4.560 bore BBC making 28 lbs of boost and they failed between the cylinders. Heads and block were flat. I then got...
I like to find my drivers at the track, horse race track that is. I make Mike cut weight before he's allowed into the car. If that timing was 10*...
Well I may have found some of the reason the plugs showed no heat. TDC was off 10 degrees. Our 28 to 30 was 18 to 20 . Live and learn, probably...
What is a reasonable et/mph expectation for my combo, tuning ideas? 566 BBC 4.25 X 4.535 11.25/1 compression Dart 320's by CFE 350 cc's flow...
My Dart 320 CFE's are the same way. I've been running them for 4 years now without any problems. BBC 1471
My statement is not inaccurate, perhaps what was told to me by your staff was. I don't remember your guys name as it was over 2 years ago but I...
About 2 years ago I was interested in picking up a used A980. I knew Whipple didn't re-cert anymore but wanted to know about service and parts....
wouldn't an air bleed take care of the problem? We run the bodies with no holes and a small air bleed.
Well I think we found the problem. Took the tank out and both the top and the bottom of the vent looked clear. Seems it was blocked within the...
Just freshened up the blown altered and noticed the sides and top of the tank have been sucked in. While not totally collapsed it is very...
