Separate names with a comma.
I bought a Bran new never fired 4.375x4.375 BAE Bullet STD deck long block With TI RCD hub- Castle gear drive and pump extension, lifters and...
typical 526 BAE hemi with stage V Fat heads, Im building a 10.5 outlaw door car and I have limited space due to having to run stock frame...
im running a auto trans in a door car, With a standard Chry flywheel with a standard Chry starter
Who sells a on board start for BAE hemi with a Mag44 that will bolt to a Coan mid plate adapter. Also do I have to spin the motor extra fast to...
it is called a turbo glide it uses the turbo 400 case. with his 2 speed internals
I had a long talk with Carl about this 1st gear selection and he absoultley recomended the 1.40, although my car is not light in outlaw trim its...
When you compare the energy at the plug the MSD 10 plus does pretty good against everything except the MSD ProMag 44 which is king at 950...
I was not questioning its durability I have one with the 1 3/16 shaft havent run it yet. My question was more towards how does a 2 speed work...
With my MSD 10 plus I ran a MSD Digital muti step retard#8975 with dual delay timer Part # 7563. Its has 2 timing stages I would leave the line...
anybody running one of these 2 speed rossler turbo glides in a blown car?
I was running a bruno/3 speed lenco, switched to a Rossler 2 speed turbo glide
thanks for the info
Im aware that the head wont come off with a straight mag drive without removing the mag. Are you saying that the mag will simply not clear the...
I have a Solid BAE hemi with stage V fat heads with Fab valve covers, do I need a off set mag drive to clear my head/valve cover, or can I run a...
ya thanks Everybody I bought that 1 from Roger
526 BAE stage V fat head 14-71 Superman Kelbelco on Alochol= I know the Mag is the way to go but I allready have the 10 plus and so far its worked...
It has a dent in the tray top cover piece looks like a rod made slight contact with it. The pan rail, outside sides, and obviously the swinging...
Does anybody make a Fabricated aluminum single plug valve cover for the Fat head hemi?? thanks chris
keith black makes a side oiler kit
Ive been running a Keith black all aluminum water block and stage V water heads for 3 yrs with good results running water through it. My question...
